Home > Woodchart® End Table Assembly Details
Woodchart® End Table Assembly

Your new Woodchart® Nautical Chart Side Table is easy to assemble. Total assembly time should be less than 10 minutes. The tools needed are:
  • 7/16th wrench
  • Small to medium size Phillips screwdriver
To get started unpack the box and cover your work area with a soft cloth or towel to prevent scratches. Place the table base upside down on your work area. Attached the legs to base. The legs are numbered 1 thru 4 just as the indents they fit into. Each leg will fit only 1 way. After the legs are in place, put a washer on the threaded rod in the leg top and screw the nut on. Turn the nut until tight. Do not over tighten. Turn the table base upright as shown in figure1.

Remove your 16' X 20" Woodchart® from the packing and with the Phillips screwdriver remove the 2 screws on the back which hold the mounting hardware. Save the screws and hardware as you want to mount the chart on the wall someday. Place the chart in the table base map side up as show in Figure 2.

Place the glass top in place as show in Figure 3. No screws of other hardware is needed!

Enjoy your new nautical chart side table!